Estonian Base Implementation Guide
1.1.1 - trial-use
Publication Build: This will be filled in by the publication tooling
Draft as of 2024-07-30 |
Definitions for the ee-related-person resource profile.
Guidance on how to interpret the contents of this table can be found here
0. RelatedPerson | |
2. RelatedPerson.identifier | |
Short | Kontaktisiku identifikaatorid. |
Note | This is a business identifier, not a resource identifier (see discussion) |
Must Support | true |
4. RelatedPerson.identifier.system | |
Control | 1..? |
Binding | Unless not suitable, these codes SHALL be taken from Patient Identifier Domain (extensible to https://fhir.ee/ValueSet/patient-identifier-domain ) |
Must Support | true |
6. RelatedPerson.identifier.value | |
Control | 1..? |
Must Support | true |
8. RelatedPerson.patient | |
Type | Reference(EEBase Patient) |
Must Support | true |
10. RelatedPerson.relationship | |
Must Support | true |
Slicing | This element introduces a set of slices on RelatedPerson.relationship . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
12. RelatedPerson.relationship:class | |
Slice Name | class |
Short | Association or legal relationship between two entities. |
Control | 0..* |
14. RelatedPerson.relationship:class.coding | |
16. RelatedPerson.relationship:class.coding.system | |
Control | 1..? |
Binding | Unless not suitable, these codes SHALL be taken from RoleClass (extensible to http://terminology.hl7.org/ValueSet/v3-RoleClass ) |
Fixed Value | http://terminology.hl7.org/CodeSystem/v3-RoleClass |
18. RelatedPerson.relationship:person | |
Slice Name | person |
Short | Social relation to the patient |
Control | 0..* |
20. RelatedPerson.relationship:person.coding | |
22. RelatedPerson.relationship:person.coding.system | |
Control | 1..? |
Binding | Unless not suitable, these codes SHALL be taken from Person Relationship (extensible to https://fhir.ee/ValueSet/person-relationship ) |
Fixed Value | http://snomed.info/sct |
24. RelatedPerson.telecom | |
Must Support | true |
26. RelatedPerson.address | |
Type | Address(EEBase Address) |
Guidance on how to interpret the contents of this table can be found here
0. RelatedPerson | |
Definition | Information about a person that is involved in a patient's health or the care for a patient, but who is not the target of healthcare, nor has a formal responsibility in the care process. |
Short | A person that is related to a patient, but who is not a direct target of care |
Control | 0..* |
Is Modifier | false |
Must Support | false |
Summary | false |
Invariants | dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty()) dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().ofType(canonical) | %resource.descendants().ofType(uri) | %resource.descendants().ofType(url))) or descendants().where(reference = '#').exists() or descendants().where(ofType(canonical) = '#').exists() or descendants().where(ofType(canonical) = '#').exists()).not()).trace('unmatched', id).empty()) dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()) dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty()) dom-6: A resource should have narrative for robust management (text.`div`.exists()) |
2. RelatedPerson.implicitRules | |
Definition | A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc. |
Short | A set of rules under which this content was created |
Comments | Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc. |
Control | 0..1 |
Type | uri |
Is Modifier | true because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies its meaning or interpretation |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
4. RelatedPerson.contained | |
Definition | These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, nor can they have their own independent transaction scope. This is allowed to be a Parameters resource if and only if it is referenced by a resource that provides context/meaning. |
Short | Contained, inline Resources |
Comments | This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels. |
Control | 0..* This element is affected by the following invariants: dom-2, dom-4, dom-3, dom-5 |
Type | Resource |
Is Modifier | false |
Must Support | false |
Summary | false |
Alternate Names | inline resources, anonymous resources, contained resources |
6. RelatedPerson.modifierExtension | |
Definition | May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
Short | Extensions that cannot be ignored |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them |
Must Support | false |
Summary | true |
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
8. RelatedPerson.identifier | |
Definition | Identifier for a person within a particular scope. |
Short | Kontaktisiku identifikaatorid.A human identifier for this person |
Comments | RelatedPerson identifiers might not be unique across instances within a system, as a single human individual may be represented as many different RelatedPerson resources with different roles, periods, or relationships. |
Note | This is a business identifier, not a resource identifier (see discussion) |
Control | 0..* |
Type | Identifier |
Is Modifier | false |
Must Support | true |
Summary | true |
Requirements | People are known by a variety of ids. Some institutions maintain several, and most collect identifiers for exchange with other organizations concerning the patient. Examples are national person identifier and local identifier. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
10. RelatedPerson.identifier.use | |
Definition | The purpose of this identifier. |
Short | usual | official | temp | secondary | old (If known) |
Comments | Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. |
Control | 0..1 |
Binding | The codes SHALL be taken from IdentifierUsehttp://hl7.org/fhir/ValueSet/identifier-use|5.0.0 (required to http://hl7.org/fhir/ValueSet/identifier-use|5.0.0 )Identifies the purpose for this identifier, if known . |
Type | code |
Is Modifier | true because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one. |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Requirements | Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
12. RelatedPerson.identifier.system | |
Definition | Establishes the namespace for the value - that is, an absolute URL that describes a set values that are unique. |
Short | The namespace for the identifier value |
Comments | Identifier.system is always case sensitive. |
Control | 10..1 |
Binding | Unless not suitable, these codes SHALL be taken from For codes, see Patient Identifier Domain (extensible to https://fhir.ee/ValueSet/patient-identifier-domain ) |
Type | uri |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | true |
Requirements | There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. |
Example | <br/><b>General</b>:http://www.acme.com/identifiers/patient |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
14. RelatedPerson.identifier.value | |
Definition | The portion of the identifier typically relevant to the user and which is unique within the context of the system. |
Short | The value that is unique |
Comments | If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the http://hl7.org/fhir/StructureDefinition/rendered-value). Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. |
Control | 10..1 This element is affected by the following invariants: ident-1 |
Type | string |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | true |
Example | <br/><b>General</b>:123456 |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
16. RelatedPerson.active | |
Definition | Whether this related person record is in active use. |
Short | Whether this related person's record is in active use |
Comments | This element is labeled as a modifier because it may be used to mark that the resource was created in error. |
Control | 0..1 |
Type | boolean |
Is Modifier | true because This element is labelled as a modifier because it is a status element that can indicate that a record should not be treated as valid |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | false |
Summary | true |
Requirements | Need to be able to mark a related person record as not to be used, such as if it was created in error. |
Meaning if Missing | This resource is generally assumed to be active if no value is provided for the active element |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
18. RelatedPerson.patient | |
Definition | The patient this person is related to. |
Short | The patient this person is related to |
Control | 1..1 |
Type | Reference(EEBase Patient, Patient) |
Is Modifier | false |
Must Support | true |
Summary | true |
Requirements | We need to know which patient this RelatedPerson is related to. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
20. RelatedPerson.relationship | |
Definition | The nature of the relationship between the related person and the patient. |
Short | The relationship of the related person to the patient |
Comments | The directionality of the relationship is from the RelatedPerson to the Patient. For example, if the Patient is a child, and the RelatedPerson is the mother, the relationship would be PRN (parent) or MTH (mother). |
Control | 0..* |
Binding | The codes SHOULD be taken from PatientRelationshipTypehttp://hl7.org/fhir/ValueSet/relatedperson-relationshiptype (preferred to http://hl7.org/fhir/ValueSet/relatedperson-relationshiptype )The nature of the relationship between a patient and the related person. |
Type | CodeableConcept |
Is Modifier | false |
Must Support | true |
Summary | true |
Requirements | We need to know the relationship with the patient since it influences the interpretation of the information attributed to this person. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
Slicing | This element introduces a set of slices on RelatedPerson.relationship . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
22. RelatedPerson.relationship:class | |
Slice Name | class |
Definition | The nature of the relationship between the related person and the patient. |
Short | Association or legal relationship between two entities.The relationship of the related person to the patient |
Comments | The directionality of the relationship is from the RelatedPerson to the Patient. For example, if the Patient is a child, and the RelatedPerson is the mother, the relationship would be PRN (parent) or MTH (mother). |
Control | 0..* |
Binding | The codes SHOULD be taken from PatientRelationshipTypehttp://hl7.org/fhir/ValueSet/relatedperson-relationshiptype (preferred to http://hl7.org/fhir/ValueSet/relatedperson-relationshiptype )The nature of the relationship between a patient and the related person. |
Type | CodeableConcept |
Is Modifier | false |
Must Support | false |
Summary | true |
Requirements | We need to know the relationship with the patient since it influences the interpretation of the information attributed to this person. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
24. RelatedPerson.relationship:person | |
Slice Name | person |
Definition | The nature of the relationship between the related person and the patient. |
Short | Social relation to the patientThe relationship of the related person to the patient |
Comments | The directionality of the relationship is from the RelatedPerson to the Patient. For example, if the Patient is a child, and the RelatedPerson is the mother, the relationship would be PRN (parent) or MTH (mother). |
Control | 0..* |
Binding | The codes SHOULD be taken from PatientRelationshipTypehttp://hl7.org/fhir/ValueSet/relatedperson-relationshiptype (preferred to http://hl7.org/fhir/ValueSet/relatedperson-relationshiptype )The nature of the relationship between a patient and the related person. |
Type | CodeableConcept |
Is Modifier | false |
Must Support | false |
Summary | true |
Requirements | We need to know the relationship with the patient since it influences the interpretation of the information attributed to this person. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
26. RelatedPerson.telecom | |
Definition | A contact detail for the person, e.g. a telephone number or an email address. |
Short | A contact detail for the person |
Comments | Person may have multiple ways to be contacted with different uses or applicable periods. May need to have options for contacting the person urgently, and also to help with identification. |
Control | 0..* |
Type | ContactPoint |
Is Modifier | false |
Must Support | true |
Summary | true |
Requirements | People have (primary) ways to contact them in some way such as phone, email. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
28. RelatedPerson.address | |
Definition | An address expressed using postal conventions (as opposed to GPS or other location definition formats). This data type may be used to convey addresses for use in delivering mail as well as for visiting locations which might not be valid for mail delivery. There are a variety of postal address formats defined around the world. The ISO21090-codedString may be used to provide a coded representation of the contents of strings in an Address. Address where the related person can be contacted or visited. |
Short | An address expressed using postal conventions (as opposed to GPS or other location definition formats)Address where the related person can be contacted or visited |
Comments | Note: address is intended to describe postal addresses for administrative purposes, not to describe absolute geographical coordinates. Postal addresses are often used as proxies for physical locations (also see the Location resource). |
Control | 0..* |
Type | Address(EEBase Address) |
Is Modifier | false |
Must Support | false |
Requirements | Need to keep track where the related person can be contacted per postal mail or visited. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
Guidance on how to interpret the contents of this table can be found here
0. RelatedPerson | |
Definition | Information about a person that is involved in a patient's health or the care for a patient, but who is not the target of healthcare, nor has a formal responsibility in the care process. |
Short | A person that is related to a patient, but who is not a direct target of care |
Control | 0..* |
Is Modifier | false |
Must Support | false |
Summary | false |
Invariants | dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty() )dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource ( contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().ofType(canonical) | %resource.descendants().ofType(uri) | %resource.descendants().ofType(url))) or descendants().where(reference = '#').exists() or descendants().where(ofType(canonical) = '#').exists() or descendants().where(ofType(canonical) = '#').exists()).not()).trace('unmatched', id).empty() )dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated ( contained.meta.versionId.empty() and contained.meta.lastUpdated.empty() )dom-5: If a resource is contained in another resource, it SHALL NOT have a security label ( contained.meta.security.empty() )dom-6: A resource should have narrative for robust management ( text.`div`.exists() ) |
2. RelatedPerson.id | |
Definition | The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes. |
Short | Logical id of this artifact |
Comments | Within the context of the FHIR RESTful interactions, the resource has an id except for cases like the create and conditional update. Otherwise, the use of the resouce id depends on the given use case. |
Control | 0..1 |
Type | id |
Is Modifier | false |
Must Support | false |
Summary | true |
4. RelatedPerson.meta | |
Definition | The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource. |
Short | Metadata about the resource |
Control | 0..1 |
Type | Meta |
Is Modifier | false |
Must Support | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
6. RelatedPerson.implicitRules | |
Definition | A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc. |
Short | A set of rules under which this content was created |
Comments | Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc. |
Control | 0..1 |
Type | uri |
Is Modifier | true because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies its meaning or interpretation |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
8. RelatedPerson.language | |
Definition | The base language in which the resource is written. |
Short | Language of the resource content |
Comments | Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute). |
Control | 0..1 |
Binding | The codes SHALL be taken from AllLanguages (required to http://hl7.org/fhir/ValueSet/all-languages|5.0.0 )IETF language tag for a human language |
Type | code |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | false |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
10. RelatedPerson.text | |
Definition | A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety. |
Short | Text summary of the resource, for human interpretation |
Comments | Contained resources do not have a narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later. |
Control | 0..1 This element is affected by the following invariants: dom-6 |
Type | Narrative |
Is Modifier | false |
Must Support | false |
Summary | false |
Alternate Names | narrative, html, xhtml, display |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
12. RelatedPerson.contained | |
Definition | These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, nor can they have their own independent transaction scope. This is allowed to be a Parameters resource if and only if it is referenced by a resource that provides context/meaning. |
Short | Contained, inline Resources |
Comments | This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels. |
Control | 0..* This element is affected by the following invariants: dom-2, dom-4, dom-3, dom-5 |
Type | Resource |
Is Modifier | false |
Must Support | false |
Summary | false |
Alternate Names | inline resources, anonymous resources, contained resources |
14. RelatedPerson.extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | Additional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | false |
Must Support | false |
Summary | false |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
16. RelatedPerson.modifierExtension | |
Definition | May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
Short | Extensions that cannot be ignored |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them |
Must Support | false |
Summary | true |
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
18. RelatedPerson.identifier | |
Definition | Identifier for a person within a particular scope. |
Short | Kontaktisiku identifikaatorid. |
Comments | RelatedPerson identifiers might not be unique across instances within a system, as a single human individual may be represented as many different RelatedPerson resources with different roles, periods, or relationships. |
Note | This is a business identifier, not a resource identifier (see discussion) |
Control | 0..* |
Type | Identifier |
Is Modifier | false |
Must Support | true |
Summary | true |
Requirements | People are known by a variety of ids. Some institutions maintain several, and most collect identifiers for exchange with other organizations concerning the patient. Examples are national person identifier and local identifier. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
20. RelatedPerson.identifier.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Short | Unique id for inter-element referencing |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Type | id |
Is Modifier | false |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
22. RelatedPerson.identifier.extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | Additional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | false |
Summary | false |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
Slicing | This element introduces a set of slices on RelatedPerson.identifier.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
24. RelatedPerson.identifier.use | |
Definition | The purpose of this identifier. |
Short | usual | official | temp | secondary | old (If known) |
Comments | Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. |
Control | 0..1 |
Binding | The codes SHALL be taken from IdentifierUse (required to http://hl7.org/fhir/ValueSet/identifier-use|5.0.0 )Identifies the purpose for this identifier, if known . |
Type | code |
Is Modifier | true because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one. |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Requirements | Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
26. RelatedPerson.identifier.type | |
Definition | A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. |
Short | Description of identifier |
Comments | This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. |
Control | 0..1 |
Binding | Unless not suitable, these codes SHALL be taken from IdentifierTypeCodes (extensible to http://hl7.org/fhir/ValueSet/identifier-type )A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. |
Type | CodeableConcept |
Is Modifier | false |
Summary | true |
Requirements | Allows users to make use of identifiers when the identifier system is not known. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
28. RelatedPerson.identifier.system | |
Definition | Establishes the namespace for the value - that is, an absolute URL that describes a set values that are unique. |
Short | The namespace for the identifier value |
Comments | Identifier.system is always case sensitive. |
Control | 1..1 |
Binding | Unless not suitable, these codes SHALL be taken from Patient Identifier Domain (extensible to https://fhir.ee/ValueSet/patient-identifier-domain ) |
Type | uri |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | true |
Requirements | There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. |
Example | <br/><b>General</b>:http://www.acme.com/identifiers/patient |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
30. RelatedPerson.identifier.value | |
Definition | The portion of the identifier typically relevant to the user and which is unique within the context of the system. |
Short | The value that is unique |
Comments | If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the http://hl7.org/fhir/StructureDefinition/rendered-value). Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. |
Control | 1..1 This element is affected by the following invariants: ident-1 |
Type | string |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | true |
Example | <br/><b>General</b>:123456 |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
32. RelatedPerson.identifier.period | |
Definition | Time period during which identifier is/was valid for use. |
Short | Time period when id is/was valid for use |
Control | 0..1 |
Type | Period |
Is Modifier | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
34. RelatedPerson.identifier.assigner | |
Definition | Organization that issued/manages the identifier. |
Short | Organization that issued id (may be just text) |
Comments | The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. |
Control | 0..1 |
Type | Reference(Organization) |
Is Modifier | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
36. RelatedPerson.active | |
Definition | Whether this related person record is in active use. |
Short | Whether this related person's record is in active use |
Comments | This element is labeled as a modifier because it may be used to mark that the resource was created in error. |
Control | 0..1 |
Type | boolean |
Is Modifier | true because This element is labelled as a modifier because it is a status element that can indicate that a record should not be treated as valid |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | false |
Summary | true |
Requirements | Need to be able to mark a related person record as not to be used, such as if it was created in error. |
Meaning if Missing | This resource is generally assumed to be active if no value is provided for the active element |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
38. RelatedPerson.patient | |
Definition | The patient this person is related to. |
Short | The patient this person is related to |
Control | 1..1 |
Type | Reference(EEBase Patient) |
Is Modifier | false |
Must Support | true |
Summary | true |
Requirements | We need to know which patient this RelatedPerson is related to. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
40. RelatedPerson.relationship | |
Definition | The nature of the relationship between the related person and the patient. |
Short | The relationship of the related person to the patient |
Comments | The directionality of the relationship is from the RelatedPerson to the Patient. For example, if the Patient is a child, and the RelatedPerson is the mother, the relationship would be PRN (parent) or MTH (mother). |
Control | 0..* |
Binding | The codes SHOULD be taken from PatientRelationshipType (preferred to http://hl7.org/fhir/ValueSet/relatedperson-relationshiptype )The nature of the relationship between a patient and the related person. |
Type | CodeableConcept |
Is Modifier | false |
Must Support | true |
Summary | true |
Requirements | We need to know the relationship with the patient since it influences the interpretation of the information attributed to this person. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
Slicing | This element introduces a set of slices on RelatedPerson.relationship . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
42. RelatedPerson.relationship:class | |
Slice Name | class |
Definition | The nature of the relationship between the related person and the patient. |
Short | Association or legal relationship between two entities. |
Comments | The directionality of the relationship is from the RelatedPerson to the Patient. For example, if the Patient is a child, and the RelatedPerson is the mother, the relationship would be PRN (parent) or MTH (mother). |
Control | 0..* |
Binding | The codes SHOULD be taken from PatientRelationshipType (preferred to http://hl7.org/fhir/ValueSet/relatedperson-relationshiptype )The nature of the relationship between a patient and the related person. |
Type | CodeableConcept |
Is Modifier | false |
Must Support | false |
Summary | true |
Requirements | We need to know the relationship with the patient since it influences the interpretation of the information attributed to this person. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
44. RelatedPerson.relationship:class.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Short | Unique id for inter-element referencing |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Type | id |
Is Modifier | false |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
46. RelatedPerson.relationship:class.extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | Additional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | false |
Summary | false |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
Slicing | This element introduces a set of slices on RelatedPerson.relationship.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
48. RelatedPerson.relationship:class.coding | |
Definition | A reference to a code defined by a terminology system. |
Short | Code defined by a terminology system |
Comments | Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. |
Control | 0..* |
Type | Coding |
Is Modifier | false |
Summary | true |
Requirements | Allows for alternative encodings within a code system, and translations to other code systems. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
50. RelatedPerson.relationship:class.coding.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Short | Unique id for inter-element referencing |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Type | id |
Is Modifier | false |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
52. RelatedPerson.relationship:class.coding.extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | Additional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | false |
Summary | false |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
Slicing | This element introduces a set of slices on RelatedPerson.relationship.coding.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
54. RelatedPerson.relationship:class.coding.system | |
Definition | The identification of the code system that defines the meaning of the symbol in the code. |
Short | Identity of the terminology system |
Comments | The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should be an absolute reference to some definition that establishes the system clearly and unambiguously. |
Control | 1..1 |
Binding | Unless not suitable, these codes SHALL be taken from RoleClass (extensible to http://terminology.hl7.org/ValueSet/v3-RoleClass ) |
Type | uri |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Requirements | Need to be unambiguous about the source of the definition of the symbol. |
Fixed Value | http://terminology.hl7.org/CodeSystem/v3-RoleClass |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
56. RelatedPerson.relationship:class.coding.version | |
Definition | The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. |
Short | Version of the system - if relevant |
Comments | Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. |
Note | This is a business version Id, not a resource version Id (see discussion) |
Control | 0..1 |
Type | string |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
58. RelatedPerson.relationship:class.coding.code | |
Definition | A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). |
Short | Symbol in syntax defined by the system |
Control | 0..1 This element is affected by the following invariants: cod-1 |
Type | code |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Requirements | Need to refer to a particular code in the system. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
60. RelatedPerson.relationship:class.coding.display | |
Definition | A representation of the meaning of the code in the system, following the rules of the system. |
Short | Representation defined by the system |
Control | 0..1 This element is affected by the following invariants: cod-1 |
Type | string |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Requirements | Need to be able to carry a human-readable meaning of the code for readers that do not know the system. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
62. RelatedPerson.relationship:class.coding.userSelected | |
Definition | Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays). |
Short | If this coding was chosen directly by the user |
Comments | Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. |
Control | 0..1 |
Type | boolean |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Requirements | This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
64. RelatedPerson.relationship:class.text | |
Definition | A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user. |
Short | Plain text representation of the concept |
Comments | Very often the text is the same as a displayName of one of the codings. |
Control | 0..1 |
Type | string |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Requirements | The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
66. RelatedPerson.relationship:person | |
Slice Name | person |
Definition | The nature of the relationship between the related person and the patient. |
Short | Social relation to the patient |
Comments | The directionality of the relationship is from the RelatedPerson to the Patient. For example, if the Patient is a child, and the RelatedPerson is the mother, the relationship would be PRN (parent) or MTH (mother). |
Control | 0..* |
Binding | The codes SHOULD be taken from PatientRelationshipType (preferred to http://hl7.org/fhir/ValueSet/relatedperson-relationshiptype )The nature of the relationship between a patient and the related person. |
Type | CodeableConcept |
Is Modifier | false |
Must Support | false |
Summary | true |
Requirements | We need to know the relationship with the patient since it influences the interpretation of the information attributed to this person. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
68. RelatedPerson.relationship:person.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Short | Unique id for inter-element referencing |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Type | id |
Is Modifier | false |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
70. RelatedPerson.relationship:person.extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | Additional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | false |
Summary | false |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
Slicing | This element introduces a set of slices on RelatedPerson.relationship.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
72. RelatedPerson.relationship:person.coding | |
Definition | A reference to a code defined by a terminology system. |
Short | Code defined by a terminology system |
Comments | Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. |
Control | 0..* |
Type | Coding |
Is Modifier | false |
Summary | true |
Requirements | Allows for alternative encodings within a code system, and translations to other code systems. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
74. RelatedPerson.relationship:person.coding.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Short | Unique id for inter-element referencing |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Type | id |
Is Modifier | false |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
76. RelatedPerson.relationship:person.coding.extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | Additional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | false |
Summary | false |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
Slicing | This element introduces a set of slices on RelatedPerson.relationship.coding.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
78. RelatedPerson.relationship:person.coding.system | |
Definition | The identification of the code system that defines the meaning of the symbol in the code. |
Short | Identity of the terminology system |
Comments | The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should be an absolute reference to some definition that establishes the system clearly and unambiguously. |
Control | 1..1 |
Binding | Unless not suitable, these codes SHALL be taken from Person Relationship (extensible to https://fhir.ee/ValueSet/person-relationship ) |
Type | uri |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Requirements | Need to be unambiguous about the source of the definition of the symbol. |
Fixed Value | http://snomed.info/sct |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
80. RelatedPerson.relationship:person.coding.version | |
Definition | The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. |
Short | Version of the system - if relevant |
Comments | Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. |
Note | This is a business version Id, not a resource version Id (see discussion) |
Control | 0..1 |
Type | string |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
82. RelatedPerson.relationship:person.coding.code | |
Definition | A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). |
Short | Symbol in syntax defined by the system |
Control | 0..1 This element is affected by the following invariants: cod-1 |
Type | code |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Requirements | Need to refer to a particular code in the system. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
84. RelatedPerson.relationship:person.coding.display | |
Definition | A representation of the meaning of the code in the system, following the rules of the system. |
Short | Representation defined by the system |
Control | 0..1 This element is affected by the following invariants: cod-1 |
Type | string |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Requirements | Need to be able to carry a human-readable meaning of the code for readers that do not know the system. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
86. RelatedPerson.relationship:person.coding.userSelected | |
Definition | Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays). |
Short | If this coding was chosen directly by the user |
Comments | Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. |
Control | 0..1 |
Type | boolean |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Requirements | This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
88. RelatedPerson.relationship:person.text | |
Definition | A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user. |
Short | Plain text representation of the concept |
Comments | Very often the text is the same as a displayName of one of the codings. |
Control | 0..1 |
Type | string |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Requirements | The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
90. RelatedPerson.name | |
Definition | A name associated with the person. |
Short | A name associated with the person |
Control | 0..* |
Type | HumanName |
Is Modifier | false |
Must Support | false |
Summary | true |
Requirements | Related persons need to be identified by name, but it is uncommon to need details about multiple other names for that person. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
92. RelatedPerson.telecom | |
Definition | A contact detail for the person, e.g. a telephone number or an email address. |
Short | A contact detail for the person |
Comments | Person may have multiple ways to be contacted with different uses or applicable periods. May need to have options for contacting the person urgently, and also to help with identification. |
Control | 0..* |
Type | ContactPoint |
Is Modifier | false |
Must Support | true |
Summary | true |
Requirements | People have (primary) ways to contact them in some way such as phone, email. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
94. RelatedPerson.gender | |
Definition | Administrative Gender - the gender that the person is considered to have for administration and record keeping purposes. |
Short | male | female | other | unknown |
Control | 0..1 |
Binding | The codes SHALL be taken from AdministrativeGender (required to http://hl7.org/fhir/ValueSet/administrative-gender|5.0.0 )The gender of a person used for administrative purposes. |
Type | code |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | false |
Summary | true |
Requirements | Needed for identification of the person, in combination with (at least) name and birth date. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
96. RelatedPerson.birthDate | |
Definition | The date on which the related person was born. |
Short | The date on which the related person was born |
Control | 0..1 |
Type | date |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
98. RelatedPerson.address | |
Definition | An address expressed using postal conventions (as opposed to GPS or other location definition formats). This data type may be used to convey addresses for use in delivering mail as well as for visiting locations which might not be valid for mail delivery. There are a variety of postal address formats defined around the world. The ISO21090-codedString may be used to provide a coded representation of the contents of strings in an Address. |
Short | An address expressed using postal conventions (as opposed to GPS or other location definition formats) |
Comments | Note: address is intended to describe postal addresses for administrative purposes, not to describe absolute geographical coordinates. Postal addresses are often used as proxies for physical locations (also see the Location resource). |
Control | 0..* |
Type | Address(EEBase Address) |
Is Modifier | false |
Must Support | false |
Requirements | Need to keep track where the related person can be contacted per postal mail or visited. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
100. RelatedPerson.photo | |
Definition | Image of the person. |
Short | Image of the person |
Control | 0..* |
Type | Attachment |
Is Modifier | false |
Must Support | false |
Summary | false |
Requirements | Many EHR systems have the capability to capture an image of persons. Fits with newer social media usage too. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
102. RelatedPerson.period | |
Definition | The period of time during which this relationship is or was active. If there are no dates defined, then the interval is unknown. |
Short | Period of time that this relationship is considered valid |
Comments | If an individual has a relationship with a patient over multiple, non-adjacent periods, there should be a distinct RelatedPerson instance for each period. For example, if a person is a roommate for a period of time, moves out, and is later a roommate with the same person again, you would have two RelatedPerson instances. |
Control | 0..1 |
Type | Period |
Is Modifier | false |
Must Support | false |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
104. RelatedPerson.communication | |
Definition | A language which may be used to communicate with the related person about the patient's health. |
Short | A language which may be used to communicate with the related person about the patient's health |
Comments | If no language is specified, this implies that the default local language is spoken. If you need to convey proficiency for multiple modes, then you need multiple RelatedPerson.Communication associations. If the RelatedPerson does not speak the default local language, then the Interpreter Required Standard can be used to explicitly declare that an interpreter is required. |
Control | 0..* |
Type | BackboneElement |
Is Modifier | false |
Must Support | false |
Summary | false |
Requirements | If a related person does not speak the local language, interpreters may be required, so languages spoken and proficiency is an important things to keep track of both for patient and other persons of interest. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
106. RelatedPerson.communication.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Short | Unique id for inter-element referencing |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Type | string |
Is Modifier | false |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
108. RelatedPerson.communication.extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | Additional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | false |
Summary | false |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
110. RelatedPerson.communication.modifierExtension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
Short | Extensions that cannot be ignored even if unrecognized |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them |
Summary | true |
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
Alternate Names | extensions, user content, modifiers |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
112. RelatedPerson.communication.language | |
Definition | The ISO-639-1 alpha 2 code in lower case for the language, optionally followed by a hyphen and the ISO-3166-1 alpha 2 code for the region in upper case; e.g. "en" for English, or "en-US" for American English versus "en-AU" for Australian English. |
Short | The language which can be used to communicate with the related person about the patient's health |
Comments | The structure aa-BB with this exact casing is one the most widely used notations for locale. However not all systems actually code this but instead have it as free text. Hence CodeableConcept instead of code as the data type. |
Control | 1..1 |
Binding | The codes SHALL be taken from AllLanguages (required to http://hl7.org/fhir/ValueSet/all-languages|5.0.0 )IETF language tag for a human language |
Type | CodeableConcept |
Is Modifier | false |
Must Support | false |
Summary | false |
Requirements | Most systems in multilingual countries will want to convey language. Not all systems actually need the regional dialect. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
114. RelatedPerson.communication.preferred | |
Definition | Indicates whether or not the related person prefers this language (over other languages he or she masters up a certain level). |
Short | Language preference indicator |
Comments | This language is specifically identified for communicating healthcare information. |
Control | 0..1 |
Type | boolean |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | false |
Summary | false |
Requirements | People that master multiple languages up to certain level may prefer one or more, i.e. feel more confident in communicating in a particular language making other languages sort of a fall back method. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |